Floor markings are especially important in conveying safety information to those who might be using equipment such as forklifts or other vehicles.
This information is most often conveyed through the use of paint or tape on the floor so that it is visible to those inside the lanes. While it was initially simply an OSHA requirement that the “permanent aisles and passageways shall be appropriately marked”, this was very vague, creating a need for further clarification.
Here are the most important points to adhere to:
The minimum width for these floor markings is two inches, but the preferred size should be in the range of two to six inches so that maximum visibility is obtained.
An aisle needs to be at least four feet wide so that there is enough room for the maximum amount of room and flexibility. However, this size should be increased even further if there are larger machines and tools used with the aisle so that the overall width must be a minimum of three feet wider than the largest machine that will be in the area.
Businesses that utilize unusual floor surfaces such as dirt and other uneven materials are allowed by OSHA to make use of traffic cones, barrels, flags, or other systems. But it is crucial that employees are properly trained on these types of systems so that the overall safety is kept to as high a standard as possible.
In terms of color, there are no specific requirements. But there are guidelines that make things more easily recognizable by those who are coming from another facility.
Red is related to fire safety. For example, flammable equipment and fire protection equipment would be most easily recognized if outlined in this color.
Yellow is generally related to a physical hazard such as striking, tripping, or stumbling. However, it is also a consistent color if used for general floor markings throughout the entire facility.
The premium warehouse striping solution is ASG Services world renowned embedded striping.
Floor Coatings
Throughout the warehouse and distribution industry, ASG Services have provided floor coatings for new and existing facilities.
Epoxy Floor Striping
Unprepared floor striping is a term given to epoxy paint which is applied to the floor without any concrete preparation taking place.
External Striping
Line striping for trailer parking lots in distribution center yard areas improve space management and safety in your workplace, we help you achieve the two with external and internal installations.
Floor Tape
Adhesive floor striping tape is easy to install, clean to use and can be applied quickly if needed. ASG Services provide several options to suit durability and budget needs.
OSHA Floor Striping Standards
ASG Services provide line striping installations to help companies achieve OSHA floor striping standards.
Shot Blast Floor Striping
The preparation method used, of removing the concrete surface using a shot blast machine, combined with an epoxy resin compound or similar applied, is the most cost effective high performing solution available.
Visit our online store
Our online store provides customers with the opportunity to purchase standardized products. The same technology, production and quality control methods are used, so you can be assured of their performance and durability.
Durable Striping
Floor Coatings
Epoxy Floor Striping
External Striping
Floor Tape
OSHA Floor Striping Standards
Shot Blast Floor Striping